|
Modbus Enabled Room Temperature Sensor w/ 0-10V Output
|
 |
- Part #: MBus_RT
- Price: $ 69.00
- To Order Manually, Click Here for the Order Form
- Contact Us to discuss Reseller, Volume or OEM Pricing
|
This Modbus enabled room temperature sensor can communicate with a supervisory control system on an RS485 network using the Modbus-RTU protocol.
The sensor also outputs an analog 0-10V signal equivalent to the current temperature, which allows the sensor to be read with a simple analog input and/or allows the sensor to be used as a tranducer to directly control an actuator or valve based on temperature.
The temperature can be read from the built-in temperature element or from any of our 10K thermistor style sensors which can be connected as external elements to the unit. This means that you can use the MBus_RT to Modbus Enable any of our thermistor sensors or act as a 0-10V transducer for any of our thermistor sensors.
This sensor's 0-10V output can be read by the following DataNab I/O modules:
- Ai32, 32 Analog Input Module
- AiO8, 8 Analog Input/Output Module
- Ai8_R13, 8 Analog Input / 13 Relay Output Module
When used with the BarioNet 1-wire Gateway solution, you can pass data from up to 8 of the above I/O modules to a higher level control system via HTTP, TCP, or ModbusTCP.
When used with the BarioNet Monitoring Application, you can expose the temperature data from up to 32 of the MBus_RT sensors to a user or higher level control system via HTTP, TCP, or ModbusTCP.
View an IP Gateway and Alarming Solution using this Sensor
|
|
|
|
|
|
Visit Our Online Store!