|
1-wire Temperature Probe with Aluminum Foil Tape |
 |
- Part #: 1WT_6SSP_3_Foil
- List Price: $25 (Click for Order Form)
- Contact Us to discuss Reseller, Volume or OEM Pricing
- View an Alarming Solution using this Sensor
- View an IP Gateway Solution using this Sensor
|
This 3" long stainless steel temperature probe is 6mm in diameter and is covered by Aluminum Foil tape for
easy mounting to flat surfaces such as pipes and tanks. The probe is the same high quality as our other probes
and is water proof with the element epoxied into the tip.
The 1-wire sensor element used is a DS18B20 with 12-bit resolution.
The probe is 3" long and has a diameter of 6mm. The Aluminum Foil Tape is 2" x 2" and sticks to surfaces with a high quality adhesive.
Multiple sensors can be daisy chained on a single CAT5 network that can extend up to 200 meters or more in a typical environment.
The sensors can receive data and power over the same CAT5 cable, which
saves time and money during install.
When used with our X8 Modbus I/O Device, up to 8 of the sensors can be accessed via Modbus-RTU for
low cost integration with a PLC System or any other Modbus Enabled Devices.
When used with the BarioNet 1-wire Gateway Module, you can pass data from up to
16 sensors to a higher level control system via HTTP, TCP, or ModbusTCP.
When used with the BarioNet 1-wire Temperature & Digital Alarming Module, you can
monitor, record, and alarm up to eight dry contacts and eight 1-wire Temperature Sensors connected to the BarioNet...
Specs:
+/- 0.5C over range of -10C to 85C
cable is approx 3ft long
Digital Sensor (DS18B20) has 12bit Resolution
|
|
|
|
|
|
