IP Enabled Controllers, Communicating Thermostats, Modbus I/O Modules
(click on each product for more details & pricing)
	Barix BarioNet: IP Enabled Programmable Controller - Click Here for Details & Pricing The BarioNet is a powerful IP enabled programmable controller with numerous I/O and communications interfaces onboard, resulting in a device that can monitor, control, and communicate with virtually anything...
	Ai32: 32 Channel Modbus Analog Input Module - Click Here for Details & Pricing The Ai32 is a Modbus Analog Input Module with 32 Analog Input Channels on board. The inputs can read 0-5V signals, 0-20mA signals, 10K Thermistor Temperature sensors, or Dry Contact Closures in low speed switching applications. One or more Ai32 modules can be IP Enabled when paired with the BarioNet I/O Gateway...
	AiO8: Modbus 8 Channel Analog Input/Output Module - Click Here for Details & Pricing The AiO8 is a Modbus Analog Input/Output Module with 8 Analog Input Channels & 8 Analog Output Channels on board. The inputs can be configured to take 0-5V signals, 0-20mA signals, 10K Thermistor Temperature sensors, or Dry Contact Closures in low speed switching applications. The outputs supply 0-10V and can be used to control valves, dampers, VFDs, etc. One or more AiO8 Modules can be IP Enabled when paired with the BarioNet I/O Gateway ...
	Ai8-R13: 8 Ch Analog Input & 13 Ch Relay Output Module - Click Here for Details & Pricing The Ai8_R13 is an Analog Input & Relay Output Module with 8 Analog Input Channels & 13 Relay Output Channels on board. The inputs can be configured to take 0-5V signals, 0-20mA signals, 10K Thermistor Temperature sensors, Dry Contact Closures, or high speed pulse inputs. The Relay Outputs can be used to control various types of On/Off devices. One or more Ai8_R13 Modules can be IP Enabled when paired with the BarioNet I/O Gateway...
	iT8: Intelligent Communicating Thermostat - Click Here for Details & Pricing The iT8 intelligent communicating thermostat can control various types of standard HVAC equipment while communicating with a higher level control system and is perfect for implementation of tenant billing, load shedding, and other responsible energy management techniques...
	Barix IO12: 12 Dig Input - 12 Dig Sourcing Output Module - Click Here for Details & Pricing The IO12 is a Modbus I/O module that provides 12 opto isolated Digital Inputs (5-30VDC) for sensing input pulses, dry contacts, and counting applications (up to 100Hz). The IO12 also provides 12 Digital Sourcing Outputs (5-30VDC) at a max of 1.5A each or a total of 6A for the entire module. One or more IO12 Modules can be IP Enabled when paired with the BarioNet I/O Gateway...
	Barix R6: Modbus 6-Ch High-amp Relay Output Module - Click Here for Details & Pricing The R6 is a 6 channel high-amp relay module capable of switching up to six separate loads at 15 Amps @ 250VAC. The R6 module provides a normally closed and a normally open contact for each relay, and is perfect for any application that requires on/off control for multiple high-amp loads. One or more R6 Modules can be IP Enabled when paired with the BarioNet I/O Gateway...
	Barix X8: Modbus 8-Channel Configurable I/O Module - Click Here for Details & Pricing The X8 is a Modbus I/O module that provides 8 independent I/O channels that can each be configured as a digital input, analog input (0-5V), or as a sinking or sourcing digital output. The X8 can also read Dallas 1-wire Temperature sensors or can be used as a Wiegand -> RS485 gateway for Card Access applications. One or more X8 Modules can be IP Enabled when paired with the BarioNet I/O Gateway...
	MBUS_IO3: Modbus Configurable I/O Module - Click Here for Details & Pricing The MBUS_IO3 is a configurable Modbus I/O device that provides 3 10A Relay Outputs, 2 0-10V Analog Outputs, 1 Universal Input, and a built-in temperature sensor. The device can be used as a Modbus Slave I/O Device, as a 0-10V temperature transducer, and/or to perform some built-in automation routines that are highly configurable by the user...
	MBUS_IO5: Modbus Configurable I/O Module - Click Here for Details & Pricing The MBUS_IO5 is a configurable Modbus I/O device that provides 5 0.5A Relay Outputs, 2 0-10V Analog Outputs, 2 Universal Inputs, 1 Digital Input, and a built-in temperature sensor. The device can be used as a Modbus Slave I/O Device, as a 0-10V temperature transducer, and/or to perform some built-in automation routines that are highly configurable by the user...