1-Wire Flush Mount Room Temperature Sensor
	- Part #: 1WT_RM_FLSH - List Price: $27   (Click for Order Form) - Contact Us to discuss Reseller, Volume or OEM Pricing Qty: - Installation Guide - View an Alarming Solution using this Sensor - View an IP Gateway Solution using this Sensor
This Flush Mount temperature sensor can be screwed directly into the drywall and painted over to become almost invisible to the occupant. The 1-wire sensor element used is a DS18B20 with 12-bit resolution. The face of the sensor has a diameter of 0.75". Multiple sensors can be daisy chained on a single CAT5 network that can extend up to 200 meters or more in a typical environment. The sensors can receive data and power over the same CAT5 cable, which saves time and money during install. When used with our X8 Modbus I/O Device, up to 8 of the sensors can be accessed via Modbus-RTU for low cost integration with a PLC System or any other Modbus Enabled Devices. When used with the BarioNet 1-wire Gateway Module, you can pass data from up to 48 sensors to a higher level control system via HTTP, TCP, or ModbusTCP. When used with the BarioNet 1-wire Temperature & Digital Alarming Module, you can monitor, record, and alarm up to eight dry contacts and 32 1-wire Temperature Sensors connected to the BarioNet... Specs: +/- 0.5C over range of -10C to 85C cable is approx 1ft long Digital Sensor (DS18B20) has 12bit Resolution

1-Wire Accessories - Standard RS232 to 1-wire Adaptor: Send your own 1-wire requests using simple ASCII commands. - Intelligent RS232 to 1-wire Adaptor: Automatically finds and polls all attached 1-wire sensors.